Exhaust flap control for standard exhaust flap
With FlapControl, you can open and close your vehicle's standard exhaust flap manually whenever you want.
It is controlled via the supplied radio remote control.
No intervention in the vehicle system, e.g. in the CAN bus, is necessary with our control unit.
Powerful engine sound from the start or quiet exhaust on the highway - you can decide for yourself with this flap control.
An exhaust flap system is created in a few simple steps. If the sports exhaust is too loud for you in certain situations,
simply close the flap with the remote control. These are just a few examples and there are many more.
The exhaust flap installed in the vehicle is controlled ex works by the vehicle's engine control unit.
When the flap is opened and closed depends on many factors. The selection of the drive program (Comfort or Sport),
but also speed, engine speed, gear, temperature, etc. determine the control of the exhaust flap.
Vehicle manufacturers equip cars with exhaust flaps to control the sound, volume and exhaust gas flow.
The switches installed by the vehicle manufacturer for driving programs or buttons for exhaust flaps are never permanently 100% open or closed,
but are constantly checked and controlled via the vehicle parameters.
This is where our flap control comes in, which has two or three buttons depending on the variant and controls the respective status 100%.
The small auxiliary control unit can be installed inside or outside the vehicle. The diagnostic capability remains fully intact, no engine indicator light.
Please also refer to our FAQ on the subject of applications, sound and volume.
The topic is very extensive and we will be happy to advise you if you have any further Questions.
Modes
OPEN (sport mode)
With the OPEN function, the exhaust flap is 100% open. I.e. at all times and until you trigger a change by remote control.
Regardless of engine speed or speed. The vehicle signal that controls the exhaust flap has no effect in this mode.
The vehicle-side buttons for driving modes are retained except for the control of the exhaust flap.
SERIES (series mode)
In SERIES mode, the vehicle behaves, as the name suggests, like a standard vehicle without any modifications.
The flap control is equally invisible, as if it had not been installed. The vehicle controls all systems, including the exhaust flap, as before the flap control system was installed.
CLOSE (comfort mode)
The CLOSE function closes the exhaust flap 100% until you set another function.
Closing the exhaust flap reduces noise emissions.
In this mode, engine speed, engine load or similar factors have no influence on the position of the exhaust flap.
Please note that this may cause permanent damage to the Vehicle.
Start mode
The start mode defines how the flap control should behave when the engine is started.
z. For example, if you have parked the vehicle or left it overnight, the start mode is activated when the engine is started.
You have the option of setting the start mode yourself using the remote control.
You also have the memory function . Here, the start mode is automatically set to the state in which the vehicle was
the vehicle was parked and then starts immediately.
Memory function
With the memory function, the flap control unit remembers the mode that was last set.
If the vehicle is then restarted after being parked, the last set mode is reactivated.
Data:
- Dimensions: 80 x 89 x 47 mm
- Housing material: Polycarbonate gray
- Temperature range: -30 °C to +80 °C
- Frequency: 433MHz
- Approval: no TÜV, no ABE
- Setting modes: OPEN, SERIES or CLOSE (depending on variant)
- Supply cable: 1.2 m
- Diagnostics capable: YES
- Connection: plug-in or screw connections
- Easy to install
- Microprocessor controlled
- Compatible with original, sport, performance or modified silencers
- Quality components
- Made in Germany
- In-house development
- Industrial production
- Elegant remote control
- Rugged housing
Scope of delivery:
- Control unit incl. cable set
- Wireless remote control 433MHz
- Fixing material
- Installation and configuration instructions
The offer refers to one flap control per vehicle of the type listed above.
Taking into account how the exhaust flap of the vehicle is controlled and how many flaps it has.
This means that only one control unit is required per vehicle.
Our flap controls are for vehicles that have a controllable exhaust flap on the rear silencer ex works.
Please note that the article selection is only a basis for your vehicle and does not imply the presence of an exhaust flap.
For some vehicles, the presence of the exhaust flap also depends on the engine, equipment or year of manufacture.
If possible, check the usability of the control unit before purchasing; we will be happy to answer any questions you may have.
For vehicles without exhaust flaps ex works, we offer control units for exhaust conversions or modifications.
Safety instructions:
- Installation may only be carried out by electronics or mechatronics specialists.
- De-energize before installing or opening the housing.
- Electrical or electronic products can pose a risk of fire or electric shock.
- The control unit is designed for motorsport and show purposes, no approval for road traffic, no TÜV or ABE certificate.
- Use and installation at your own risk, no liability for damage.
- Incorrectly set controls can lead to damage to the engine or vehicle (e.g. closed flap at full load).
- Please ensure that the seals and connections of the product are clean, intact and correctly seated before and after installation, otherwise defects or damage may occur.
- Check the product carefully for integrity before use and installation. If you notice a defect, do not use the product and contact us.
- Only use the product for the specified installation purposes and check its usability before installation or use. If you have any questions, please contact us.
General note:
Our control units are generally all available immediately from stock.
We offer flap controls for all vehicles, including motorcycles.
You can use our control units with an extension in any vehicle.
Individual solutions are possible: opening angle, number of flaps, additional functions, time control, ...
If you have any questions about the product or need advice on using it in your vehicle, please contact us.
We will help you quickly and easily.
Further questions about the product are also answered in the FAQ section.
